MT: FAA Propeller STC for Cessna P210N Silver Eagle

Silver EaglePicture: Cessna 210 Eagle, courtesy of MT-Propeller GmbH

FAA STC for Cessna P210N Silver Eagle with5-blade QFJ MT-Propeller MTV-5

Silver Eagle

Picture: Cessna 210 Eagle, courtesy of MT-Propeller GmbH

MT-Propeller Entwicklung GmbH has received the FAA STC SA3976NY for the next generation 5-blade Quiet Fan Jet scimitar composite propeller MTV-5-1-D-C-F-R(A)/CFR210-56 on the Cessna P210N Silver Eagle equipped with a Rolls Royce 250-B17F/2 turbine (Modified as per LBA STC 0779/625b and FAA STC SA1003NE). The installation is already certified by EASA STC 10060053.

MT-Propeller Vice President Martin Albrecht says, that the installation reduces ground roll & takeoff distance over 50 ft obstacle by more than 15%, enhances climb performance by 4%, provides a jet like noise and vibration level, has approx. 3,7 kg (8,1 lb) less weight than the original 3-blade metal propeller, complies with strict German noise regulations 2010, and finally improves the ramp appeal of the aircraft.

Due to the smaller diameter, the 5-blade MT-Propeller has more ground clearance for less blade tip erosion. The MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD. They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.

MT-Propeller is the world leading natural composite propeller manufacturer with 30 propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers. Over 30 years ago, the first MT-Propeller was shipped.

The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels or hovercraft. Fulfilling the highest certifications requirements they are also supplemental type certified on Part 25 aircraft. MT-Propeller is holder of over 210 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. Over 20,000 propeller systems with more than 69,000 blades are in service.
130 Million fleet hours where already performed on MT-Propellers. A factory certified network of 62 service centers, provides best service and maintenance all over the world.

Next: Seabear Aircraft Release Footage of New L72 Amphibious Plane Testing

Join Our Free Newsletter