MT Prop Approved On Mexican King Air 200/250 Series

King AirPicture: Courtesy MT Propeller Entwicklungs GmbH

MT Prop Approved On Mexican King Air 200/250 Series

King Air

Picture: Courtesy MT Propeller Entwicklungs GmbH

MT-Propeller Entwicklung GmbH has received the DGAC Mexico Validation of the EASA STC Nr. 10036196 for the installation of the 5-blade MTV-27-1-E-C-F-R(P)/CFR225-55f on the Beech Beech King Air 200/250 Series powered by the engines P&WC PT6A-41, -42, -52, -61. The installation are already supplemental type certified by EASA, FAA, Transport Canada and ANAC Brazil.

According to MT-Propeller President Gerd Muehlbauer, the installation of the 5-blade MTV-27 Propellers on the KingAir 200/250 Series feature the following advantages:

– General performance improvement (5% take-off & climb, 3 kts cruise with 1800 rpm)
– Approx. 25 lbs less weight than the original 4-blade propellers with aluminum blades
– No propeller speed restrictions on ground while operating in low idle
– More ground clearance = less FODs
– Unbeatable esthetic ramp appeal
– All models comply with the strict German noise regulations 2010– „Landeplatz Lärmschutz Verordnung“for unrestricted airport operations in Germany and other European Countries.

The MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD. They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.

MT-Propeller is the world leading natural composite propeller manufacturer with 30 certified propeller models from 2-blade to 7-blade hydraulically controlled variable pitch propeller, for engines producing up to 5000hp, and 2-blade to 4-blade electrically controlled variable pitch propeller, for engines producing up to 350hp as well as two blade fixed pitch propellers.

The high performance, light weight and durable MT-Propellers can be used on aircraft with piston engines and propeller turbines, as well as on airships, wind tunnels or hovercraft. MT-Propellers can be developed for nearly every aircraft type from motor gliders to regional airliners. Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.

MT-Propeller is holder of over 210 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. 20,000 propeller systems with more than 69,000 blades are in service. 130 Million fleet hours where already performed on MT-Propellers. 36 years ago, the first MT-Propeller was shipped. A factory certified network of 62 service centers, provides best service and maintenance all over the world.